
Fiscal cash register rules by country: TSE, NF525 and ÖKC
In several countries a fiscal cash register is not a choice but a legal requirement: the tax authority wants every sale recorded so that it cannot be altered afterwards. Germany requires a TSE, France certified till software, Türkiye an approved ÖKC device. A retailer opening stores abroad gets a different till in each country, and that reaches into network, hardware and rollout.
Germany requires a certified technical security device (TSE), France certified till software (NF525 or equivalent), Türkiye a till device approved by the tax authority (ÖKC).
The till software and its certification come from the till vendor, the interpretation from your tax adviser. Ask both, per country, before ordering hardware.
The IT side is network, time, device replacement and the rollout per country. We do not process payments and we do not certify tills.
Why a fiscal cash register differs by country
To a tax authority, a till is an instrument that measures turnover. Several countries have introduced rules for it, because software that could quietly delete sales afterwards was a known problem. The rules differ, but they all ask the same three questions.
- How is a sale recorded so that it cannot be changed afterwards without trace?
- Who verifies that the system does this: a certification body, the manufacturer or the tax authority itself?
- What must you be able to show during an inspection, and in what format?
The answer decides which till software you may use in that country, sometimes which device, and what has to happen when one fails or is replaced. The UK has no certification scheme for tills comparable to the German TSE, which is exactly why British retailers are often caught out when they open their first store on the continent. This article gives the outline per country and what it means for IT; the tax detail, such as who a rule applies to, belongs with your tax adviser.
Germany: the TSE and the KassenSichV
In Germany the Kassensicherungsverordnung requires an electronic till to be protected by a technische Sicherheitseinrichtung (TSE). The TSE signs every transaction and must be certified by the BSI, the German Federal Office for Information Security.
- Form: hardware in or on the till (a USB stick or memory card) or a cloud TSE from a provider. The till vendor decides which variants its software supports.
- Receipt: every sale comes with a receipt, on paper or electronic.
- Notification: tills must be registered with the German tax authority, and so must a replacement or decommissioning.
- Inspection: the tax authority can carry out an unannounced till inspection, the Kassen-Nachschau, and will ask for the data in a defined export format.
For IT, what matters most is that a TSE carries a certificate of limited validity and is tied to a till. Replacing a till is therefore not a matter of putting down a new terminal.
France: NF525 and certified till software
In France, a VAT-registered business that records sales to consumers on a till system must use software that meets four requirements: inalterability, security, retention and archiving of the data. Compliance is shown with a certificate from an accredited body; NF525 is the best known.
The certificate belongs to the software and a version of it, not to the hardware. Two consequences for IT:
- An update is a tax event. Ask whether the version you roll out is covered by the certificate, and keep the evidence per store.
- Your own changes to the till software can affect the certificate. Route them through the vendor.
Türkiye: the ÖKC, the new-generation till
In Türkiye, sales to consumers are recorded on an ÖKC (ödeme kaydedici cihaz), a till device approved by the Turkish Revenue Administration (Gelir İdaresi Başkanlığı). The new generation is connected to the tax authority’s systems and reports sales to them.
- The device itself is the regulated part, unlike in France. You buy it from an authorised seller and an authorised service puts it into use.
- Card payment and the ÖKC are meant to work together. There are devices that combine payment terminal and ÖKC; they come from the bank or an authorised seller, not from us.
- The connection matters. An ÖKC that cannot deliver its data is a case for the authorised service, not an ordinary fault.
The Netherlands, Belgium and Spain
The Netherlands has no certification requirement for tills like Germany or France. The tax retention obligation does apply: the core records of the business, till data included, are kept for seven years.
Belgium has the registered till system (GKS), with a fiscal data module, which applies to hospitality businesses under certain conditions. Whether it applies to you is a question for your accountant.
Spain has introduced rules for invoicing software that prohibit software allowing a second set of books, with a variant in which records go straight to the tax authority (VeriFactu). The Basque Country has its own scheme, TicketBAI. Check the applicable start date with your tax adviser; it is not something we control.
What this means for the IT side
The tax rule belongs to the legislator and the solution to the till vendor. What sits in between is IT, and that is where it goes wrong in practice.
- Network and failover. A cloud TSE or an ÖKC that talks to the tax authority needs a connection. Design the till with a second path and know what it does if that fails too; ask the vendor what has to happen for tax purposes in that situation.
- The correct time. A fiscal record carries a timestamp. A till whose clock drifts produces records that do not match the receipts.
- Replacement is a procedure. A faulty till with a TSE or ÖKC does not go back to the warehouse unnoticed. Secure the data and report it according to the vendor’s procedure first, then swap.
- Rollout per country. A store in Germany gets a different till configuration from one in the Netherlands. Record per country which software, which version and which fiscal component belongs to it, and keep spare equipment separate per country.
How the till itself sits in the store network is covered in our article on POS systems and branch connectivity.
What to ask the till vendor
- In which countries is your till software certified or approved, and with what evidence per country?
- Which TSE variants do you support in Germany, and who monitors the validity of the certificate?
- Is every version we roll out covered by the French certificate, and how do we hear about that before an update?
- What is the procedure for a faulty till: who secures the data, who reports it, and how quickly can a replacement be in fiscal use?
- Which hardware is approved for your software, so we order the right POS hardware and spares?
Where our work stops
What we do. We supply the till hardware the vendor approves, configure it, connect it to a network with a second path, keep the time correct and hold spare equipment per country. For a replacement we follow the vendor’s procedure. On site, our own local engineers do this, in every country.
What we do not do. We are not tax advisers: which rule applies to your business and from when is a question for your tax adviser or accountant. The till software and its certification belong to the till vendor; we do not certify tills and we do not modify certified software. And we do not process payments: the payment terminal comes from your payment provider or bank.
Questions we get about this
The five that come up most often.
What is a TSE on a cash register?
A TSE (technische Sicherheitseinrichtung) is the security device a German electronic till must have. It signs every transaction so that it cannot be altered afterwards without trace, and it must be certified by the BSI. It exists as hardware in or on the till and as a cloud service.
What is NF525?
NF525 is a French certification for till software. In France, software that records sales to consumers must demonstrably ensure inalterability, security, retention and archiving of the data, and a certificate such as NF525 is the proof. It belongs to the software and its version, not to the hardware.
What is an ÖKC in Türkiye?
An ÖKC (ödeme kaydedici cihaz) is a till device approved by the Turkish Revenue Administration. The new generation is connected to the tax authority’s systems and reports sales to them. It is supplied by an authorised seller and put into use by an authorised service.
Does the UK require a certified till?
The UK has no certification scheme for tills comparable to the German TSE or the French NF525. Retailers who open stores in Germany, France or Türkiye therefore meet a requirement there that they do not have at home. Your tax adviser can confirm what applies to your business.
Can you get our till approved for tax purposes?
No. We are not tax advisers and we do not certify tills; the till software and its certification belong to the till vendor. We supply and manage the approved hardware, the network and the rollout per country. We do not process payments either: the payment terminal comes from your payment provider.
Further reading
What the till connects to.
Opening a store abroad? We put the till in
Tell us which country you are opening in and which till software you use. We handle the approved hardware, the network and the rollout; the tax question stays with your adviser.
Practical IT knowledge in your inbox
New guides on management, security and the workplace, written by the people doing the work. No sales talk, and you can unsubscribe in one click.