
Managed vs unmanaged switch: what an office actually needs
The managed vs unmanaged switch question looks like a spec comparison, but it is really about who can see and divide your network. An unmanaged switch forwards everything and tells nobody anything. A managed switch lets you separate guests, tills, cameras and phones and warns you when something goes wrong. This is how to decide which belongs where.
An unmanaged switch is a power strip for network cables: it works straight away and there is nothing to configure. A managed switch can be divided, monitored and updated.
As soon as guests, a till, cameras or desk phones share the same network, you want VLANs, and for that you need at least a smart switch.
An unmanaged switch is fine at the edge: at a home office, or in a meeting room behind a managed switch. It does not belong at the core of the office network.
Managed vs unmanaged switch: the difference in practice
An unmanaged switch has no settings. You plug it in, every port can talk to every other port, and that is it. No login page, no log, no way of seeing which device sits on which port. Nothing wrong with that, as long as there is nothing to separate and nothing to watch.
A managed switch has its own management address and a configuration. With it you decide, port by port, which network a device lands in, how much power it gets, which traffic takes priority and whether a port should shut down if something odd happens on it. It reports faults, keeps a record of events and receives firmware updates.
So the deciding question is not how many ports or how fast, but: will someone later need to see and change what happens on this network? In an office with more than a handful of desks, the answer is almost always yes.
VLANs: guests, tills, cameras and phones kept apart
The most important thing a managed switch does is split one physical network into separate virtual networks. In a typical office or shop that quickly means four or five:
- Guests. Visitors get internet access and nothing else. Without separation, a visitor’s laptop sits on the same network as your file server.
- Tills and payment terminals. Payment traffic belongs in its own network with only the connections it needs. That keeps the part of your estate you have to evidence for card payment security small.
- Cameras and access control. Camera footage is personal data under UK GDPR, and cheap cameras rarely get updates for long. You do not want them next to your workstations.
- Telephony. Desk IP phones get their own VLAN with priority, so a large download does not turn into a choppy call.
- Management. The management addresses of switches, access points and the firewall itself belong in a network that ordinary users cannot reach.
The same split carries through to wireless: each wifi network maps to a VLAN. How that works out in an office is on our page about business wifi.
PoE budget: count the watts, not the ports
Access points, IP phones and cameras often draw their power over the network cable (Power over Ethernet). A switch has a PoE budget for that: the total power it can deliver across all ports together. That budget is often lower than the number of ports multiplied by the maximum per port.
- Count what each device draws. A basic handset draws little; a latest-generation access point or a heated pan-tilt camera draws far more. The standard (802.3af, at or bt) is on the datasheet.
- Leave headroom. A switch running at its budget will drop devices during a peak, and which ones depends on the priority you set per port. On an unmanaged PoE switch you cannot set it.
- Plan for growth. The access point you add next year still has to fit.
On a managed switch you can see per port how much is actually drawn, and restart a camera remotely by briefly cutting power to its port. That saves a trip to site.
Monitoring and firmware: who is watching
A managed switch only pays off if someone looks at it. In concrete terms:
- Monitoring. The switch reports through SNMP, syslog or a cloud portal when a port drops, an uplink logs errors or the temperature climbs. Those alerts need to land where they are read, not in a mailbox nobody opens.
- Firmware. Switches get security updates too. Agree who installs them, when (the switch restarts, and everything behind it goes down briefly) and what you do with devices the manufacturer no longer supports.
- Configuration as a document. Keep a copy of the configuration off the switch, with a record of which port goes where. If a unit fails, the replacement gets the same settings.
- Access. Change the default password, put management on the management VLAN and record who is allowed in.
A managed switch that nobody looks at after installation is, in practice, an expensive unmanaged switch with a default password.
Uplinks and stacking: how switches work together
An office rarely has just one switch. The links between switches, and between the switch and the firewall, are called uplinks, and that is where the traffic of every connected device comes together. A few rules of thumb:
- Make the uplink faster than the ports. Desks on 1 Gbit/s behind a 1 Gbit/s uplink all share one port. A 10 Gbit/s uplink over fibre or an SFP+ module avoids that.
- Two uplinks, not one. Link aggregation spreads traffic over two cables and keeps the network running if one fails. Only managed switches can do it.
- Stacking. Several switches in one cabinet then behave as one device with one configuration. Useful from a few switches upwards; not every switch supports it, and usually only within the same model.
An unmanaged switch offers none of the three. At most it has one faster port you can use as an uplink.
When an unmanaged switch is fine, and the smart switch in between
An unmanaged switch is not a mistake in itself. It is fine where there is nothing to separate:
- A home office with a laptop, a docking station and a printer behind the broadband router.
- A meeting room behind a managed switch, where one wall socket has to serve the screen, the conference camera and a fixed PC. The VLAN is set on the managed switch port, and everything behind the small switch falls into that one network.
- A temporary set-up, such as an event or a test bench, that comes down again afterwards.
Between the two sits the smart or web-managed switch. It handles VLANs, basic priority for voice, port mirroring and often per-port PoE settings, through a web page. What it usually lacks: a full command line, extensive monitoring, stacking and long support. For a small office with one cabinet, that can be enough.
There are also cloud-managed ranges, such as Cisco Meraki, HPE Aruba Instant On or Ubiquiti UniFi, where you run every switch from one portal. Check whether the switch keeps working if the portal subscription lapses, and what you can and cannot still do then.
Where it goes wrong: the little switch under the desk
The best-known problem with an unmanaged switch is not a slow connection but an office at a standstill. Someone puts a cheap switch under their desk to add a printer, and later a colleague plugs a loose cable with both ends into that same switch, or into two wall sockets. That is a loop: the same traffic circulates endlessly and multiplies until the whole network is saturated.
The symptoms mislead. Everything slows down or drops at once, phones lose their connection, and it looks like a fault at the broadband provider. Without managed switches, you find it by hand, socket by socket.
- Spanning tree and loop detection on the managed switches shut a port down as soon as a loop forms, instead of taking the whole network with it.
- Protection on desk ports (such as BPDU guard and storm control) stops a device at the edge from taking over or flooding the network.
- A rule that nobody adds switches themselves. One socket short is a ticket, not a DIY job.
Where our work stops
What we do. We advise which switch belongs where, supply it, run the data cabling, set up VLANs, PoE, uplinks and loop protection, and then manage the network with monitoring and firmware updates. Brand names in this article are examples; we choose case by case.
What we do not do. The internet connection and the router stay with your broadband provider. The payment terminal comes from your payment provider; we look after the network it sits on and its path out. An extra electrical circuit or cooling for the server cabinet is work for an electrician. And we certify nobody: whether your network segmentation is sufficient for card payment security is assessed by a qualified security assessor.
Questions we get about this
The five that come up most often.
What is the difference between a managed and an unmanaged switch?
An unmanaged switch has no settings: everything on it can talk to everything else and you cannot see what is happening. A managed switch can be divided into VLANs, given per-port PoE and priority settings, monitored and kept up to date with firmware. For an office network with guests, telephony or cameras, you need the latter.
Do I need a managed switch for VLANs?
You need at least a smart or web-managed switch; an unmanaged switch cannot create VLANs. An unmanaged switch behind a managed port does take on that port’s VLAN, but everything behind it then sits in the same network.
What is a smart switch?
A smart or web-managed switch sits between unmanaged and fully managed. It handles VLANs, basic priority and often per-port PoE, through a web page. It usually lacks extensive monitoring, stacking and a full command line. For a small office with one cabinet, that can be enough.
Can an unmanaged switch take down the whole network?
Yes, if a loop forms, for instance when a cable has both ends in the same small switch or in two wall sockets. Traffic then circulates endlessly and everything slows down or drops. Managed switches with spanning tree and loop detection shut down only the affected port in that case.
Do you also handle the internet connection and the power in the server cabinet?
No. The internet connection and router stay with your broadband provider, and an extra circuit or cooling is work for an electrician. We supply and manage the switches, access points and firewall, run the data cabling and configure the network. The payment terminal does not come from us either, but from your payment provider.
Further reading
What this choice connects to.
The brands above, one page each
What the brand makes, which lines we supply and what we do around it.
Shall we look over your network?
Send us a photo of your network cabinet and a list of what is connected to it. We will tell you which switches can stay, which are better replaced and which VLANs you are missing.
Practical IT knowledge in your inbox
New guides on management, security and the workplace, written by the people doing the work. No sales talk, and you can unsubscribe in one click.