
IT asset disposal: reuse, WEEE and the certificate
IT asset disposal is usually pictured as a lorry in the car park, while most of the work happens before it arrives: what can be used again, what actually belongs to the leasing company, and what still has to come out of device management. This is the order in which an organisation retires its laptops, screens and servers, and the paperwork you should hold at the end.
Recycling is the last step, not the first: anything that still works goes back into use, is sold or is donated first.
Business electronics fall under the WEEE Regulations and your waste duty of care: they go to a registered carrier and an authorised treatment facility, not the general waste skip.
At the end you want one report per serial number: what happened to each device, who handled it, and the wiping certificate alongside.
Reuse first, recycling last
A recycled device yields raw materials; a reused device yields a working device that does not have to be made again. That is the waste hierarchy, and for IT it is also the cheapest order:
- Internal reuse. A laptop too slow for a developer can serve for years on a reception desk, in a warehouse or as a spare.
- Resale or refurbishment. Equipment a few years old often has residual value, provided it is complete and wiped.
- Donation. To a school or charity, if the equipment still works well and you can show the data has gone. How to do that without risk is covered in our article on donating retired IT.
- Recycling. Whatever no longer works or has no value goes to a treatment facility that separates the materials.
Write that order into your policy, with a simple rule per type of device. Otherwise the decision is made by whoever happens to clear the cupboard, and they choose the skip.
IT asset disposal and the WEEE rules for businesses
Waste electrical and electronic equipment must not go in general business waste. It contains substances that do not belong in the environment, and batteries that can catch fire when transported carelessly. In the UK the WEEE Regulations 2013 cover it, and your duty of care for business waste applies on top: you must hand it to someone authorised to take it and keep a record of the transfer.
In practice that means three checks before anything leaves. Is the carrier registered as a waste carrier? Is there a waste transfer note, or a consignment note where items count as hazardous waste? And where does it end up: an approved authorised treatment facility, named on the paperwork. For business equipment, producer take-back schemes, your reseller or an ITAD provider are the usual routes for IT asset disposal.
Two things often go wrong: loose and swollen laptop batteries must travel separately and safely packed, and monitors and printers are WEEE too, even if they never appear in your IT asset register.
Before anything leaves: the list
Most disposal problems start because nobody knows exactly what is in the box. Start from your asset register and ask four questions per device:
- Who owns it? Leased or rented equipment goes back to the lessor, not to recycling. Check the contract for who handles wiping; usually you remain responsible for your data.
- Is it still enrolled? A laptop still registered in Windows Autopilot or Apple Business Manager, or an iPhone with Activation Lock, cannot be set up by the next owner. That costs residual value and sometimes the whole device. Release devices before handover.
- Does it hold data? Every drive is wiped or destroyed before it leaves the chain, and that is recorded per drive.
- Is it complete? A laptop without its charger or a server without drive caddies is worth less than a complete one. Keep accessories with the device.
Licences tied to a device are cancelled or reassigned at the same moment. Otherwise you pay for a device that is already at the treatment facility.
Collection and transport: whoever counts, signs
Handover is the moment responsibility shifts, so it is the moment to be precise. What should happen there:
- Count by serial number at collection, not by number of boxes. The list travels with the load and is signed by both sides.
- Secure transport, sealed crates or a locked vehicle, so the list still matches on arrival.
- Report discrepancies straight away. A device in the register but not in the crate is chased now, not in three months.
For large volumes or sensitive environments, wiping can take place on site before transport. Then you move equipment without data, and transport risk becomes a logistics risk rather than a data protection one.
The certificate: what it must show
At the end you want two kinds of document, and they are often confused. The certificate of data sanitisation or destruction proves the data is gone, per drive. The certificate of disposal or recycling proves what happened to the device itself. The second should show:
- The destination per serial number: reused, resold, donated or recycled.
- The treatment facility by name, with its permit or approval, for everything recycled.
- Dates of receipt and processing, so the chain ties back to the collection list.
- Weight per category, if you need it for sustainability reporting or your ISO 14001 records.
- A reference to the wiping certificate for every device with a drive.
A certificate with only a total weight and a signature proves that a load was handed over, not what was in it. Ask for the list by serial number and match it against your own collection list.
Residual value: what drives the return
Whether disposal costs money or brings some in depends less on who does it than on the condition you hand the equipment over in. What drives residual value:
- Age and type. Business laptops and recent servers hold value better than consumer equipment.
- Condition and completeness: working battery, charger, no broken hinges, no asset stickers that will not come off.
- Free of management: no longer enrolled in device management and no BIOS password.
- Timing. Value drops every month equipment sits in a storeroom. A fixed disposal moment per quarter or per rollout wave works better than one big clear-out a year.
- Volume. A batch of identical models is easier to process than a mixed collection.
Agree beforehand how residual value is assessed and settled, and whether you see per device what it fetched.
Where our work stops
What we do. We take the inventory, collect and count by serial number, wipe or arrange destruction with a certificate per drive, assess what can be reused or resold, and deliver one report per serial number with its destination. We hold ISO 14001 certification, and that is how we run the chain.
What we do not do. We are not a waste treatment facility or a recycler: separating and processing materials happens at an authorised treatment facility, named on the certificate. We do not write your sustainability report and we are not your accountant; we supply the data you need for it. Leased equipment is governed by your lease, and what it says about returns and wiping is agreed with the lessor.
Questions we get about this
The five that come up most often.
Can old IT equipment go in our general business waste?
No. Waste electrical and electronic equipment falls under the WEEE Regulations and your duty of care: it must go to a registered carrier and an authorised treatment facility. That includes monitors, printers, phones and loose batteries. Keep the waste transfer documentation.
What is the difference between IT recycling and reuse?
Recycling takes a device apart and recovers its materials. Reuse puts the whole device back into service, internally or with a new owner. Reuse comes first because no new device has to be made; recycling is for whatever no longer works or has no value.
What should an IT disposal certificate include?
Per serial number what happened to the device, the name and permit of the treatment facility, the dates of receipt and processing, and a reference to the data wiping certificate. A certificate showing only a total weight proves that something was handed over, not what.
What happens to leased laptops at the end of the contract?
They go back to the leasing company, not to recycling. Check the contract for who handles wiping and which certificate you receive; you remain responsible for the data on them. Also remove the devices from device management before you return them.
Are you a recycling company?
No. We handle the inventory, collection, wiping, reuse and reporting. Separating and processing materials happens at an authorised treatment facility, which is named on the certificate.
Further reading
What else is tied to disposal.
A cupboard full of old equipment?
Tell us how many devices there are and where they are. You will get a plan covering what can be reused, what will be recycled and the report by serial number you hold at the end.
Practical IT knowledge in your inbox
New guides on management, security and the workplace, written by the people doing the work. No sales talk, and you can unsubscribe in one click.