Request a quote
Emergency SectorsCareers About us Blog Get in touch
Table with printed charts, a laptop and a hand holding a pen

Printer hire or lease: what the contract really says, and what you only notice on return

Printer hire for the office usually arrives as a monthly fee and a cost per page. What it really costs is in the rest of the contract: the minimum volume, the renewal, the early termination charge and what happens to the storage inside the device when it goes back. This is the list we work through before anyone signs.

5 min read Written by the ITproposal team
Short answer

Rental and operating leases leave ownership with the supplier; a finance lease is a purchase paid in instalments. The quote often shows only the monthly fee, while the real difference is who holds the device at the end.

The cost per page is usually the largest part of the bill. Look hardest at the minimum volume: overestimate it and you pay every month for pages nobody prints.

A multifunction device stores scans and address books. Agree before signing who wipes the storage on return, by what method and with what certificate.

Printer hire, lease or buy: three different contracts

Printer hire and a printer lease sound like the same offer, and the quote often shows only the monthly figure. The difference is not in that figure but in who owns the device and what happens at the end.

  • Rental and operating lease. You pay for use, the supplier stays the owner and the device goes back at the end. A machine that is too slow after three years or keeps jamming is their problem.
  • Finance lease. A purchase paid in instalments. You carry the economic ownership from day one, along with the risk of obsolescence and residual value. The monthly fee is often lower for that reason, but you are buying something different.
  • Buy with a separate service contract. The device is yours, and toner, parts and engineer visits are bought separately, often per page as well.

In all three there is usually a second agreement underneath: a price per printed page for consumables and maintenance. Read the contract as two contracts, one for the device and one for what it uses, even when they sit on a single document.

The cost per page: what each click includes

Over the term of a contract, the cost per page (often called the click charge) is almost always the largest item, larger than the monthly fee for the device. That makes it worth knowing exactly what it covers.

  • What is included. Usually toner, wear parts such as the drum and fuser, and engineer visits. Paper and staples almost never. If it just says “maintenance”, ask for the list.
  • Mono and colour separately. A colour page is charged differently from a mono page, and some contracts count a page with one coloured logo as colour.
  • How the meter is read. Automatically over the network, or by someone sending a photo. With the second, it goes wrong at some point, and then the reading is estimated, rarely in your favour.
  • Paper size and duplex. Whether an A3 page counts as two clicks, and whether a double-sided sheet counts as one or two.

The minimum volume: overestimating is expensive

Nearly every cost-per-page contract has a minimum: a number of pages per month or per quarter that you pay for whether you print them or not. A lower price per page often comes with a higher minimum, and that is exactly the trade that looks attractive on the quote.

Base the volume on meter readings, not on a feeling. The devices you have now know how much they have printed. Read the meters, divide by the months they have been in place, and look for a trend. In organisations that work more digitally and from home, print volume usually falls rather than rises.

Ask two more things: whether the minimum applies per device or across the whole fleet (pooled is better, because the busy machine makes up for the quiet one), and whether the minimum can be reviewed mid-term if volume demonstrably drops.

Term, renewal and ending early

A printer contract often runs for several years, and the most expensive clauses sit at the end of it.

  • Automatic renewal. For how long the contract renews and how much notice you must give. Put that date in the diary on the day you sign.
  • Early termination. On a lease you often pay the remaining instalments in one go. Ask how that settlement figure is calculated before you need it.
  • Adding a device. If a machine is added halfway through, does it get its own term? That is how you end up with a fleet where no two contracts end together and you can never switch in one move. Ask for co-terminous end dates.
  • Moving office. Who relocates the device and at what cost. With a hired machine you are usually not allowed to move it yourself.

Faults and maintenance: what the service clause must say

“Service included” is an intention. A response time and a route make it a commitment.

  • The response time. Within how many working hours an engineer arrives, and whether that applies to every site or only to head office.
  • Who you call. The contract supplier, the manufacturer or a service partner. It should be one number, and it should fit the way your staff already report faults.
  • Consumables. Whether toner is sent automatically based on what the device reports, or whether someone has to order it. The second means an empty cartridge on a Friday afternoon.
  • What is excluded. Damage from the wrong paper, a device that has been moved, changes made by someone else. Read the exclusions, because that is where the invoices come from.

On return: the storage, the address book and the residual value

A multifunction printer is a computer with storage. It keeps what passes through it, an address book with the email addresses of everyone in the organisation, and often the credentials it uses to send scans to email or a network folder. Hand back a hired or leased printer without dealing with that, and the data goes with it.

Write into the contract who wipes the storage, by what method and whether you receive a certificate with the serial number on it. On a printer with an SSD, overwriting works poorly; the built-in erase command, or encryption with the key destroyed, is the right route. How to make that call is covered in our article on whether to wipe or destroy a drive.

Two more points. Revoke the scanning credentials on the day the device leaves, not later. And on a finance lease, check the purchase price at the end: sometimes taking it over and disposing of it yourself is the better route, sometimes not. Under UK GDPR, the data on that storage remains your responsibility until it is gone.

What no printer contract covers: the device on your network

A lease covers the machine and its consumption. It almost never covers who keeps the printer secure on your network, and that is exactly where a printer becomes a risk: a networked device with a web interface that rarely gets updates.

So agree separately, with the supplier or with whoever manages your IT, who changes the admin password, who updates the firmware, which network segment the printer sits on and whether its storage is encrypted. If it is written down nowhere, nobody does it. Our page on printers and printing sets out the costs that sit beside the purchase price.

Where our work stops

What we do. We supply business printers and include the cost per page in a proposal, not just the purchase price. We put the device on the network with its own admin password and the firmware in the maintenance cycle, and we wipe storage media with a certificate per serial number.

What we do not do. We are not accountants: whether a printer lease goes on your balance sheet and how it is treated for tax is a question for your accountant, not your IT supplier. We do not assess a leasing company’s finance terms and we do not review contracts legally, including another supplier’s. What we can tell you is what a clause means for management, volume and what happens on return.

Frequently asked

Questions we get about this

The five that come up most often.

What is the difference between printer hire and a printer lease?

With rental and an operating lease the supplier remains the owner and the device goes back at the end. With a finance lease you pay for a purchase in instalments and carry the economic ownership, including the risk of obsolescence and residual value. The monthly fee tells you little about this; the contract does.

What does a cost per page include?

Usually toner, wear parts and engineer visits, priced separately for mono and colour. Paper and staples are almost never included. Watch the minimum volume you pay each month or quarter, even when you print less.

What happens to the data on a printer that goes back?

A multifunction device stores scans, an address book and often login credentials. Agree before signing who wipes the storage, by what method, and that you receive a certificate with the serial number. Also revoke the scanning credentials on the day the device leaves.

Can you end a printer lease early?

Usually yes, but on a lease you often pay the remaining instalments in one go. Ask in advance how that settlement is calculated and for how long the contract renews automatically. Those are the two clauses that cost the most money.

Can you tell us how to account for a printer lease?

No. We are not accountants, we do not give tax or accounting advice, and we do not review contracts legally. We can explain what a clause means for management, volume and the return of the device.

Related services

Further reading

Where this contract connects.

Shall we put your printer contract next to your meter readings?

Send us the contract and the meter readings of the devices you have now. We will tell you whether the volume is right and what needs to be settled for the return; the accounting we leave to your accountant.

Practical IT knowledge in your inbox

New guides on management, security and the workplace, written by the people doing the work. No sales talk, and you can unsubscribe in one click.

We use your address for the newsletter only. See our privacy policy.

Request a quote Call