Request a quote
Emergency SectorsCareers About us Blog Get in touch
Employee at a desk in an open-plan office with colleagues in the background

Managed print services: what you hand over when you outsource the printers

Managed print services sounds like a contract for printers, but it is a piece of management you hand over: who keeps track of the fleet, who sends toner before it runs out, who fixes the fault, who keeps the printers secure and who tells you what is being printed. This article goes through those parts, with the questions that decide whether the work really leaves your desk.

5 min read Written by the ITproposal team
Short answer

With managed print services, one party takes over the work around the printers: inventory, consumables, faults, security and reporting. How you finance the devices is a separate question.

Follow-me printing belongs in it: the job waits until someone signs in at any device. It needs a link to your user accounts and a plan for when the print service itself goes down.

Compare quotes on what falls outside the cost per page, on who manages the print platform and on what you take with you when you leave, not just on that price.

What managed print services are, and what they are not

Managed print services (MPS) means one party takes over the care of your printers: which devices there are and where, that toner is in stock, that faults get fixed, that the devices sit securely on the network, and that you know what is being printed. You usually pay per page, per device or per user.

It is not a way of financing. Whether you buy, rent or lease the printers is separate from who manages them. A lease with a cost per page is not yet outsourced management: it only becomes that when someone else takes over the tasks that now sit with your office manager or your own IT team.

That distinction sharpens the question. Write down what happens with printers today, who does it and how much time it takes: ordering toner, paper jams, a new starter who cannot print, the driver after an update. That list is what you are outsourcing, and it is also the yardstick for every quote.

Start with the inventory: what is really there

Every project starts with counting, and the result almost always surprises. Beside the multifunction devices in the corridor there are desk printers once bought for one person, a colour printer nobody uses any more, and a device at a second site that appears on no list.

  • Per device: make, model, location, age, meter reading and whether it still receives firmware updates.
  • Per department: who prints, how much, in colour or not, and whether anything must be on paper, such as labels or delivery notes.
  • The integrations: which devices scan to email or to a network folder, and with which account. Those are the links that break when something changes.

The list usually shows that fewer devices are needed, better placed. A good MPS provider says so even when it costs them revenue. A provider who replaces every existing device one for one has skipped the inventory.

Toner, faults and maintenance without anyone phoning

The part you notice first is that nobody orders toner any more. The devices report their levels and faults over the network, and whoever holds the management sends toner before it runs out and an engineer before anyone calls.

Ask three things. Who changes the toner: the provider, or someone in the office who receives a box. Where a fault is logged: on a separate number for the print provider, or in the same ticketing system your staff already use for every other IT issue. Two front doors for one desk means the call lands at the wrong one. And what the response time is: within how many working hours an engineer arrives, and whether that applies to every site.

Look at the monitoring itself too. It is software on a server or in the cloud that reads your network; ask what it sees, where that data is stored and who can access it.

Follow-me printing: print at any device

Follow-me printing, also called pull printing or secure print release, holds a job until someone signs in at a printer with a card, a code or an app. You send the job to one virtual printer and collect it at any device, on any floor or site.

It solves two things: nothing confidential is left in the output tray, and jobs nobody collects are never printed. What it requires is often underestimated:

  • A link to your user accounts. The print service has to know who someone is, usually through Microsoft Entra ID or Active Directory. A leaver must disappear from it too.
  • A card reader or another way to sign in on every device, matching the cards you already use for the door.
  • A plan for outages. If the print server or cloud service goes down, nobody prints. Agree what happens then, including for the team that must always be able to print.
  • Guests and shared accounts. A visitor who needs a document printed, or a till that sends a receipt, does not always fit the model. Decide up front which devices stay outside it.

Security: the printer as a networked computer

A network printer has an operating system, storage, a web interface and an address book, and it rarely receives updates. A managed print contract should therefore say who is responsible for:

  • The admin password, changed per device and never left at the factory default.
  • The firmware, updated on a fixed cycle, with a warning when a device stops receiving updates.
  • The network segment the printers sit on, so a printer is not a way into everything else.
  • Scan to email using an account with modern authentication, not a password entered years ago.
  • The storage: encrypted in use, and wiped with a certificate when the device leaves.

If the print provider is separate from whoever manages the rest of your IT, write down who handles the network segment and the accounts. Otherwise exactly that seam falls between two parties. More on the wider picture is on our cybersecurity page.

Reporting: what you want to see each quarter

A monthly page count is not reporting. What you want to see is what you can act on:

  • volume per device and per department, mono and colour separately;
  • devices that are barely used, and devices that are consistently overloaded;
  • jobs sent and never collected, if follow-me printing is switched on;
  • faults per device, with the time to resolution;
  • devices that no longer receive firmware updates.

Agree that the data is yours and can leave with you in a common format. At the next tender it is the best basis you will have.

Comparing managed print services quotes: five questions

  • What falls outside the cost per page? Paper, staples, moving devices, extra devices, a second site, installing the print software on new laptops.
  • Who manages the print platform? The software for follow-me printing and monitoring belongs to a third party. Who holds the licence, who updates it and who you call when it fails must be in writing.
  • One brand or several? A provider that only manages its own brand leaves the rest of your fleet with you. Ask explicitly.
  • How does it connect to your service desk? Does a print fault arrive where your staff already log everything else, or at a second front door?
  • What do you take with you when you leave? The data, the configuration, the devices themselves if they are yours, and the certificate that the storage was wiped if they go back.

Where our work stops

What we do. We supply business printers and include the cost per page in a proposal, not just the purchase price. We put them on the network with their own admin password, on their own segment and with the firmware in the maintenance cycle, and include them in management and the service desk when your IT is with us. When a device leaves, we wipe the storage with a certificate per serial number.

What we do not do. We are not a manufacturer: the warranty on the machine and the parts of the print engine run through the manufacturer. The software for follow-me printing and monitoring belongs to a third party; we set it up and connect it, while the licence and its development stay with the vendor. And what you keep, for how long and on paper or digitally, is your organisation’s decision and not part of print management.

Frequently asked

Questions we get about this

The five that come up most often.

What are managed print services?

Managed print services means one party takes over the care of your printers: inventory, consumables, faults, security and reporting. You usually pay per page, per device or per user. It is separate from whether you buy, rent or lease the printers.

What is follow-me printing?

With follow-me printing a job waits until someone signs in at a printer with a card, a code or an app, and it can be collected at any device. Nothing confidential is left in the tray and jobs nobody collects are never printed. It needs a link to your user accounts and a plan for when the print service goes down.

What is the difference between managed print services and a printer lease?

A lease is a way to finance the devices. Managed print services is the management around them: toner, faults, security and reporting. You can have one without the other, and a lease with a cost per page is not yet outsourced management.

Is printer security part of managed print services?

It should be, but it is far from always in the contract. Write down who handles the admin password, the firmware, the network segment, the scan account and wiping the storage. If another party manages the rest of your IT, agree who watches the seam between the two.

Do you also provide the print software and document management?

The software for follow-me printing and monitoring belongs to a third party; we set it up and connect it to your accounts, while the licence and its development stay with the vendor. What you keep and for how long is your own organisation’s decision. We are not a manufacturer either: warranty and parts for the machine run through the manufacturer.

Related services

Further reading

Where print management connects.

Shall we start by counting your printers?

Tell us how many sites you have and what is there now. We will tell you which devices you need, what belongs in the management and which part stays with the manufacturer or the software vendor.

Practical IT knowledge in your inbox

New guides on management, security and the workplace, written by the people doing the work. No sales talk, and you can unsubscribe in one click.

We use your address for the newsletter only. See our privacy policy.

Request a quote Call